[Nicko]

How to detail Dodge Charger exterior

The Charger exterior is the most susceptible part when it comes to dirt: bird poo, splatters of filth or mud, road debris—all together, they distort the vehicle's appearance and spoil your mood until you decide to do a complete exterior detailing, taking care of every millimeter to be pure and shiny like a coin.

To restore your Dodge's initial marvelous outlook, simply follow these steps below:

Step 1: Apply pre-cleaner to the entire surface of the body

Take a special Dodge Charger body pre-cleaner chemical and apply it evenly on the dry vehicle`s surface. Now wait some time (from 5 to 7 minutes) until the chemicals soak into the dirt.

Shop From Amazon


                   

Chemical Guys ACC_326 – Torq Foam Blaster 6 Foam Wash Gun – The Ultimate Car Wash Foamer t...
                   
 
                   

Maxshine Snow Master Foam Cannon
                   
 
                   

AstroAI Foam Cannon, Heavy Duty Car Foam Blaster Wide Neck Adjustable Snow Foam Lance and...
                   
 
               

Chemical Guys EQP324 Big Mouth Max Release Foam Cannon (Car Wash, Home Wash & Boat Wash Fo...
                   

                   
[/url]
[url=https://www.amazon.com/dp/B072JNQQY9?tag=modelsnet-blog-20]TriNova Foam Cannon for Pressure Washer - Original Wide Neck, Wide Base Heavy Duty Foam Gu...
                   
Step 2: Rinse off the pre-cleaner with cold water

After several minutes pass, use cold water to remove the pre-cleaner from the surface. Then, wait for 3 minutes until the main amount of water drains.

Step 3: Apply the car foam or shampoo on the body of your Dodge Charger

Add some foam or car shampoo to the slightly wet surface of the car`s body. Wait 5 minutes until it does its job. After that, rinse the foam with water.

Shop From Amazon
   

                   

Meguiar’s Gold Class Car Wash - For Father's Day, Give the Gift of a Clean and Glossy Car...
                   
  
                   

Chemical Guys CWS_402_64 Mr. Pink Foaming Car Wash Soap (Works with Foam Cannons, Foam Gun...


                   

Adam's Car Wash Shampoo (16 fl. oz) - pH Best Car Wash Soap For Snow Foam Cannon or Gun, C...
                   
Step 4: Apply the iron remover on the Dodge Charger

Now use a special agent to remove the iron drops. Leave it for 5-7 minutes. While the substance is doing its job, you may see leaks starting to appear on the vehicle`s body. Do not panic; it has to be so. Now wash everything off.

Shop From Amazon
   
  
                   

Adam's Iron Remover (2-Pack) - Iron Out Fallout Rust Remover Spray for Car Detailing | Rem...
                   
   

                   
Adam's Iron Remover (16oz) - Iron Out Fallout Rust Remover Spray for Car Detailing | Remov...
                   
 
                   

GYEON Quartz Q²M Iron 500 ml - Iron Remover Breaks Down Embedded Iron Deposits in Paint an...
                   
Step 5: Re-apply the foam to the Charger body

Once again, as in step 3, apply foam or car shampoo to a car's body.

Step 6: Thoroughly clean hard-to-reach areas of the Dodge Charger manually

With the help of brushes, clean hard-to-reach areas thoroughly, making sure that foam penetrates every single place. While cleaning with a brush, pay special attention to such areas as the radiator grill, air intakes, a place for wipers, zones near headlights, and the glass attachment point.

Also, do not forget to apply a brush to other complicated areas that foam couldn't reach or did barely.

Shop From Amazon
   

                   

Ultra-Soft Detailing Brush Set, Comfortable Grip and Scratch-Free Cleaning for Exterior, I...
 

                   

TEUOPIOE Auto Interior Dust Brush, Car Detailing Brush, Soft Bristles Detailing Brush Dust...
                   
How to Clean Dodge Charger`s Rims

Now special attention should be paid to cleaning the rims, as they tend to collect most of the dirt, litter, and mud because they are located closer to the ground. Below, you`ll find useful tips on how to make your rims look clean and shiny.

Rim`s Cleaning Procedure

• Rinse your wheels with the water to remove some of the dirt or debris and make them wet;
  
• Apply some cleaning foam evenly on the wheels. Assuming that rims can be different due to their type and pattern, carefully reach all the complicated places with a stiff brush;
  
• Wash out the foam from the rims with clean water separately from the Charger`s body;
  
• Now apply iron remover and wait some time until it does it`s job and you`ll see leaks appearing;
  
• Wash everything again with clean water;
  
• Apply foam on your rims once again. This time use a soft brush to clean your wheels;
  
• Finally, wash everything up thoroughly.
  

Clean your Dodge Charger's body by hand

Clean your Dodge's entire body with the help of car sponges and soft brushes. In order to prevent unnecessary damage to the paint, don`t scrub or press on the surface.

Additionally, apply some water to make the car`s body wet and avoid friction while cleaning the dirt. After everything is done, wash everything up with warm water.

Dry your vehicle

After you have your vehicle washed, it's time to dry it out. This task should be done manually. Take a microfiber towel for the car, completely straighten it, throw it on the body of the car, and pull. The towel will collect all the water from the vehicle.

Shop From Amazon
   

                   

USANOOKS Microfiber Cleaning Cloth - 12Pcs (16x16 inch) High Performance - 1200 Washes, Ul...
                   
 
                   

AIDEA Microfiber Cleaning Cloths-50 Pack, Premium All-Purpose Car Cloth, Lint Free, Scratc...
                   
 
                   

AIDEA Microfiber Cleaning Cloths-50PK, Softer Highly Absorbent, Lint Free Streak Free for...