[Nicko]

How do you choose a window tint for the Dodge Charger?



Deciding to tint your Dodge Charger allows you to select the perfect film for your car. Consider these key factors when choosing:

- Light transmission capacity. Different films block the sun's rays to varying degrees. They are rated by their light transmission level, where 100% is the clearest and 0% is the darkest. Choose a film that offers good visibility under all conditions, keeping in mind that you'll be driving in various weather scenarios, not just in bright sunlight.

It's vital to maintain good visibility for safety. Test the film in different lighting conditions to ensure it doesn’t impair your ability to see the road.

- Manufacturer and price. Avoid the cheapest options as they can reduce visibility and have other drawbacks like fading or peeling. Look for a balance between cost and quality, and don’t hesitate to read reviews or seek advice from experienced individuals.

Shop From Amazon
   

                   

TOYOCO Car Window Tint Window Privacy Film, Car Shade Front Windshield, Heat & UV Block an...
                   
 
                   
           

DIY Car Window Tinting Kit Custom Precut Tint Cut Outs All Side and Back Windows
                   
 
                   

KESPEN Window Film One Way Reflective Daytime Privacy Heat Blocking Anti UV Mirror Window...

How do you tint the Dodge Charger?

Tinting your Dodge Charger's windows is a meticulous process. Here’s a guide to help you achieve the best results.

What do you need to tint the Dodge Charger’s windows?

• Window cleaner;
  
• Microfiber cloth;
  
• Blade for cleaning windows;
  
• Sprayer (pulverizer);
  
• Soap solution;
  
• The blade, a small but sharp knife;
  
• Toning film;
  
• Plastic spatula;
  
• Heat gun (optional).
  

Wash your Charger’s windows

Clean the windows of your Charger thoroughly before starting. Use a window cleaner and a microfiber cloth to remove all dirt and debris, then rinse and dry for a clear surface.

Remove the old toner film



If your Charger already has tinted windows, remove the old film first. Don’t layer new film over the old as it affects the end result and adhesion.

To remove the old film, you can either heat it with a heat gun and peel it off, or use a blade to scrape it away. Be careful not to scratch the glass.

Once the old film is removed, clean off any remaining adhesive with a chemical cleaner designed for this purpose, ensuring the window is completely clean before applying new film.

Note: Be cautious when using chemical cleaners as they can be toxic. Always work in a well-ventilated area and follow safety guidelines.

Prepare the toning film

Handling the film, note it has a dark tint layer and a protective layer. Determine which side the protective layer is on – it should face you during installation.

Separate the layers by lifting the edge with a blade. The transparent layer faces you.

Prepare a soap solution



Make a soapy solution by mixing water with a few drops of liquid soap. Use a sprayer for easy application during the tinting process.

Cut out the necessary shape from the tinting film

Remember, the tinting film is applied to the interior side of the glass, but you'll measure and cut it on the exterior. Thus, when you cut the film, it will be applied in a mirror-like fashion.

Let's start with tinting your Dodge Charger.

Apply a soapy solution to the outside of the window you plan to tint

It's crucial to prepare the surface before applying tint to your Dodge Charger’s window. Start by spreading a soapy solution on the outside of the window. This aids in proper adhesion and helps prevent air bubbles during the application, ensuring a smooth and desirable result.

Place the tinting film on the glass. Spread it with a plastic spatula or a plastic card

Keep in mind: the transparent layer of the tinting film should face you. If not, you'll need to start over.



Use a knife to cut the tint to the shape of the glass

Trim the excess film using a blade. Cut the film to match the glass shape, leaving about 1 inch on each side (top, bottom, and sides) for adjustment.

Adapt the shape of the cut film to your window’s shape

Shift the film 1 inch to the left edge, then trim the right edge. Adjust the film so that there's about 1/2 inch of extra film on each side of the window.

Lower the window slightly and use its top edge as a guide to trim the film. Ensure you have about 1/2 inch of excess film on all sides.

Trim the excess film at the corners to prevent it from touching the window when closing.

Prepare the inside of the window glass

Clean the inside of the glass thoroughly. Apply a generous amount of soapy solution to assist in the film's application.

Remove the protective (transparent) layer from the tinting film

Carefully separate the protective layer from the film. Once removed, immediately wet the adhesive side with a soapy solution to prevent debris from sticking.

Apply the tinting film to the interior side of the glass

Align the film on the interior glass surface, ensuring it fits snugly. Adjust it carefully as the wet surface allows some repositioning.

Pro tip: Leave a small margin at the top to prevent the film from being damaged by the rubber seal.

Smooth out the tinting film and remove excess water

Once the film is properly aligned, use a spatula or card to squeeze out excess water from underneath. This step is crucial to avoid water drying out and leaving air bubbles behind.

Repeat these steps for all windows

To ensure a consistent and professional look, repeat these steps for each window of your Dodge Charger. Proper application on all windows will enhance the overall appearance of your vehicle.